Fluorine sodium silicate factory analysis - the cause of low yield Appropriate chemical industry

sodium fluosilicate fluorosilicate is important, in the process of production, sodium fluosilicate manufacturers generally adopt continuous synthesis process, with sodium sulfate and fluosilicic acid as the raw material.

however, in actual production, because sodium fluosilicate manufacturer is for the purpose of make full use of the resources of fluorine, therefore USES is salt consumption acid method, also is to use too much salt to ensure fluosilicate make full use of, this can cause loss of too much salt.

sodium fluosilicate manufacturers to study for many times, the yield of sodium fluosilicate is low, because the raw material fluosilicate failed to receive adequate reaction, or of sodium fluosilicate dissolved in aqueous solution or suspension with the loss of mother liquor.

according to the analysis of chemical equilibrium point of fluorine sodium silicate manufacturer to make fluosilicate reaction to the largest degree, will need to increase the concentration of the raw material, and let the raw material of fluosilicate as much as possible into fluorine sodium silicate.

sodium fluosilicate manufacturer research know, sodium fluosilicate solubility in the acid solubility higher than in the water, as a result, each production by a plenty of fluorine resources as the solution. To study the factors that influence the solubility of fluorine sodium silicate manufacturer from control can minimize the loss of fluorine resources.

sodium fluosilicate crystal particles is a customer of sodium fluosilicate quality requirements of a standard, but the production brine and not conducive to excessive fluorine sodium silicate in the quality of the products, therefore, fluorine sodium silicate manufacturers need to experiment to get the balance, so as to better produce good fluorine sodium silicate.