Fluorine sodium silicate factory measures to prevent fluorine sodium silicate agglomerate - Appropriate chemical industry

fluorine sodium silicate has the difference between wet and dry powder, powder fluorine sodium silicate is very easy to agglomerate, agglomerate also belongs to the normal phenomenon, fluorine sodium silicate factory in order to prevent wet powder fluorine sodium silicate agglomerate, also take some measures of anticaking.

sodium fluosilicate manufacturer studies have found that sodium fluosilicate mainly according to & other Moisture absorption & ndash; On the surface of the particles dissolve & ndash; Evaporation crystallization & ndash; The bridge between particles & throughout; The order cycle, and then after a certain time can agglomerate.

sodium fluosilicate manufacturer combining capillary adsorption theory, in order to prevent sodium fluosilicate agglomerate must do the following:

( 1) On the production process must make big and homogeneous spherical particle or add modifier in the production of large grain fluorine sodium silicate, in order to avoid the influence of capillary phenomenon.

( 2) The crystallization of sodium fluosilicate fully adsorption on the surface of washing to remove impurities.

( 3) In low humidity environment or packing under low temperature.

( 4) In strict accordance with the requirements for pile up, in order to reduce storage pressure.

sodium fluosilicate manufacturers found that to achieve the above points, at the same time still there are a lot of difficulties, in order to achieve the ideal anticaking effect, fluorine sodium silicate manufacturers will have to be in adding a small amount of sodium fluosilicate crystal anticaking agent.

sodium fluosilicate manufacturer is considering the nature of sodium fluosilicate agglomerate principle, to the corresponding measures to prevent fluorine sodium silicate agglomerate, overall improved the quality of sodium fluosilicate, also has brought considerable economic benefits for the enterprise.