Potassium carbonate manufacturer of vacuum design improvements - potash desulfurization technology Appropriate chemical industry

potassium carbonate is mainly used in the manufacture of glass, soap, and other inorganic chemicals, along with the development of the market, more and more varieties of potash, many industries for potash also had higher levels of demand.

potash manufacturer production vacuum desulfurization technology, to produce potassium carbonate can be used in the high-end product market, but the design of the process itself is not good, so some potash manufacturer on the basis of the original design to improve the production process.

potash increased steam condensate pump manufacturers, the potash starts early due to gas generates less than on the cooler in the early period of hot water temperature is low, cannot satisfy the requirement of desorption tower over the hot water temperature, such easy to cause the desorption bottom temperature is low, go against hydrogen sulfide gas desorption. Potash producer in order to guarantee the desorption effect, on the basis of original increase condensate pump, in order to meet the production requirements, ensure the stable operation of the production.

potash factory improvement of acid gas pipe in the bottom of the acid gas pipe increase vent pipe lead to the vacuum condensate tank, acid tracheal path at the same time increase the acid gas gas-liquid separator, removing acid gas in the clutter.

in desulfurization production by adding potassium hydroxide liquid trough for the rich, total potassium carbonate concentration needed for regulating system, the intermittent operating in winter is very bad. Potash producer in order to solve this problem, increased after the potassium hydroxide metering pump return line to the potassium hydroxide alkaline bath, and the entrance of the rich liquid trough pipe flow meter, so you can continuous quantitative add potassium hydroxide to the system.

potash manufacturers to improve the desulfurization technology, to solve the present problems of the many, but for the problem of the chimney exhaust gas content of, or in further research, are step by step towards green economical to produce.